China Professional 1.8K CE Smith Galvanized Boat Trailer Axle Beam with EZ-Lube Standard Spindles a car axle

Product Description

CE Smith Trailer Axles – CE33201GA

  • 1800 lbs
  • 57-1/2 Inch Long
  • 46-1/2 Inch
  • Spindles Only
  • Leaf Spring Suspension
  • No Hubs
  • CE Smith
  • Easy Lube Spindles

 

Square trailer axle beam measures 57-1/2″ from hub face to hub face (when hubs – sold separately – are mounted) and 46-1/2″ from spring center to spring center. Corrosion-resistant galvanized steel is great for a boat or snowmobile trailer.

 

Features:

  • Square axle beam acts as part of your trailer’s suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • Galvanized steel construction is sturdy and provides corrosion resistance
    • Great for boat or snowmobile trailers
  • Reversible straight beam can be used for underslung or overslung applications
  • Seatless design – does not require spring seats
  • EZ-lube straight spindles – no drop
    • Built-in grease zerks for simple lubrication
  • 2 Spindle nuts, 2 spindle washers, and 2 cotter pins included

 

Specs:

  • Weight capacity: 1,800 lbs
  • Hub-face-to-hub-face length: 57-1/2″
  • Spring-centering-hole-to-spring-centering-hole length: 46-1/2″
  • Overall length: 62″
  • Tubing width: 1-1/2″
  • Spindle size: 1-1/16″

 

Bearing, Race, and Seal Information

  • Bearings (sold separately)
    • Inner/outer bearing: L44649
  • Races (sold separately)
    • Inner/outer race: L44610
  • Grease seal (sold separately): RG06-571
    • Inner diameter: 1.5″
    • Outer diameter: 1.987″

 

Galvanized Steel

Galvanized steel parts are great for marine use because they are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding, making them a good choice for boat and snowmobile trailers.

PN Axle Type Rating Hub Face to Hub Face Spring Center To Spring Center Axle Tube diameter Overall length Spindle size Bearings
TAB014  1,800 lbs Trailer Axle Beam 1,800 lbs. 57-1/2″ 46-1/2″ 1-1/2″ 62″ 1-1/16″ L44649/10;L44649/10

SELECTING THE PROPER TRAILER AXLE
When selecting an axle for your application remember to consider the following important specifications:

  • LOAD CAPACITY:  the load rating of the axle must support the maximum gross vehicle weight rating. For multiple axle trailers divide the GVWR by the number of axles to determine the minimum load capacity of each axle.

  • TRACK LENGTH:  measure your axle track length by determining the distance between the center of 1 tire to the center of the other tire. A more precise measurement can be made by measuring the distance from 1 ‘HUB FACE’ to the other. The hub face is also known as the mounting surface where the wheel studs are located.

  • SPRING CENTERS:  measure the distance from the center of 1 spring to the center of the other.
    NOTE: not required for replacement torsion axles

  • OVERALL LENGTH:  measure the distance from the very end of an axle’s spindle to the very end of the opposite spindle.

  • AXLE STYLE:  important when reusing old mounting hardware and also for proper tire clearance. Includes straight axles (round or square), drop axles with offset spindles, and torsion axles. Also consider spindle size when reusing existing hubs or drums.

  • AXLE CAMBER:  Most trailer axles are designed with a bend in the tube that will deflect when the load (weight of the trailer) is applied. This will theoretically bring the trailer wheel camber toward a 0 value that is the best setting for most trailer applications. This will allow the tires to wear evenly and allow the longest tread life. Camber can be affected by damage to the axle. For example, if the axle spindle is bent, this will usually cause a negative camber on that side which will cause excess tread wear on the inside of that tire.

     

 

HangZhou CZPT Machinery Co., Ltd is a professional manufacturer of trailer parts in HangZhou, ZHangZhoug Province, China since 2016.

 

We can produce many trailer parts & accessories as follows: Towbars, axles, brake drums, hubs, brake disc, bearings, springs and springs and suspension kits, couplings, mudguards, U-Bolts, Jockey Wheels, keel rollers and brackets, wobble roller, wheel spacer, equalizers and all accessories related to trailers.

If you can send me the drawings or specifications of the trailer parts, mechanical parts and wheels, we can give you our price.

Q1: Do you have factory?
A: Yes, we have our own factory, own engineers, we can meet custom’s unique requirement.

Q2: Can I have a sample order?
A: Yes, welcome sample order to test and check quality. Mixed samples are acceptable.

Q3: It’s OK to print my logo on your product?
A: Yes, we can according to your exact requirement.

Q4:How do you ship the goods and how long does it take arrive?
A: We usually shipped by DHL, UPS, FedEx, it usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5: What is your advantages?
A: We are professional supplier for more than 10 years, we always put the quality and price at the first place. At the same time, our products are exported to various countries, we have full experience to solve thorny problems.

If you want to know about our products and us, welcome to enquiry and email me.thanks

1-Welcome OEM

  1. You can use your own brands or ours, if you use our brand, our professional team will help you design the packing.

2-Our service

  1. You inquiry related to our products or prices will be replied in 24 hours.
  2. Well-trained and experienced staffs to answer all your enquirys in fluent English.
  3. Protection of your sales area, ideas of your design and all your private information.
  4. We have a QC team, every product will be checked by them before packed.

3-Welcome to visit

  1. When you come to our company visit us, we will arrange a car for picking up and help you book hotel. If you want to visit the local scenic spot, our colleague will accompany you.

4-Warranty

  1. Customer should be provide the video and the pictures for the problem products.
  2. Products returned within the warranty period must bear product number & date code.

5-After service

  1. In production and after delivery, we will track on time and tell you goods situation.
  2. When the goods arrived, if you find any design and quality questions, or difference from your samples, please feel free to contact us, we will find the question and solve it with you.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Condition: New
Axle Number: 2
Application: Trailer
Certification: ASTM, CE, DIN, ISO
Material: Steel
Type: Front Axles
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

beam axle

How does a solid beam axle impact the ride quality of a vehicle?

A solid beam axle can have both positive and negative impacts on the ride quality of a vehicle. The specific effects depend on various factors, including the suspension setup, road conditions, and the vehicle’s intended use. Here’s how a solid beam axle influences ride quality:

1. Simplicity and Durability:

Positively, solid beam axles are known for their simplicity and durability. The absence of complex moving parts makes them robust and less prone to mechanical failures. This can contribute to a smoother ride over time, as there are fewer components to wear out or require maintenance.

2. Load Distribution:

A solid beam axle’s design allows for even distribution of weight across both wheels on the axle. This can lead to improved stability and handling, especially when carrying heavy loads. Vehicles with solid beam axles may have reduced body roll, enhancing the perception of ride quality.

3. Off-Road Capability:

Solid beam axles are commonly used in off-road vehicles due to their ability to maintain wheel contact with uneven terrain. In off-road applications, this feature can lead to a more comfortable ride, as the suspension flexes to absorb shocks and maintain traction on challenging surfaces.

4. Stiffness and Comfort:

On the downside, solid beam axles are generally stiffer compared to independent suspension systems. This stiffness can result in a less comfortable ride on smooth or well-paved roads. The vehicle may transmit more road imperfections and vibrations to the passengers.

5. Limited Articulation:

In certain situations, a solid beam axle’s limited articulation can impact ride quality. For example, when one wheel encounters a bump or obstacle, the other wheel is affected as well. This can lead to a bumpier ride compared to independent suspension systems, where each wheel can move independently to absorb shocks.

6. Road Conditions:

Ride quality is highly dependent on road conditions. On rough, uneven, or unpaved roads, a solid beam axle may perform better by maintaining wheel contact and stability. Conversely, on smooth and well-maintained roads, the ride quality may be less comfortable due to the stiffness of the axle.

7. Vehicle Design and Tuning:

Manufacturers can influence ride quality by designing the suspension components and tuning the shock absorbers to complement the solid beam axle. While the inherent stiffness remains, adjustments can be made to mitigate the negative effects and enhance comfort.

8. Passenger Expectations:

Ultimately, perceptions of ride quality can vary among passengers. Some may prioritize stability and load-carrying capacity, accepting the trade-off of a stiffer ride. Others may prioritize a smoother, more comfortable ride and opt for vehicles with independent suspension systems.

Summary:

The impact of a solid beam axle on ride quality is influenced by various factors, including the vehicle’s design, suspension tuning, and road conditions. While solid beam axles offer durability, load distribution, and off-road capability, they may result in a stiffer and less comfortable ride on smooth roads when compared to independent suspension systems.

beam axle

How do beam axles contribute to the load-carrying capacity of vehicles?

Beam axles play a crucial role in enhancing the load-carrying capacity of vehicles, especially in heavy-duty and commercial applications. Their design and characteristics contribute to this capacity in several ways:

1. Weight Distribution:

Beam axles are known for their ability to evenly distribute the weight of the vehicle and its cargo. This even distribution of weight helps maintain stability and balance, preventing overloading of a specific wheel or axle. In heavy-duty trucks and buses, this balanced weight distribution is vital to ensure safe and efficient transportation of goods and passengers.

2. Load-Bearing Capacity:

Beam axles are engineered to handle heavy loads. Their robust construction and materials are chosen to withstand the stress and weight of cargo. This load-bearing capacity is critical for commercial vehicles that carry substantial payloads, such as delivery trucks, construction vehicles, and agricultural equipment.

3. Durability and Resistance:

Heavy-duty and commercial vehicles are exposed to challenging conditions and road surfaces. Beam axles are designed to be durable and resistant to damage from road impacts, rough terrain, and heavy loads. This durability ensures that the axles can maintain their load-carrying capability over time, reducing the need for frequent maintenance or repairs.

4. Support for Trailers:

Beam axles are commonly used in trailers and semi-trailers, where they provide support for the weight of the trailer and its cargo. This support is essential for maintaining stability and preventing issues like trailer sway. The load-bearing capacity of beam axles is instrumental in safely transporting goods and materials on the road.

5. Simplicity and Maintenance:

The straightforward design of beam axles simplifies maintenance and reduces downtime. This is particularly important in commercial applications where minimizing maintenance and maximizing uptime are priorities. The ease of maintenance helps ensure that the axles continue to contribute to the load-carrying capacity of the vehicle throughout their service life.

6. Customization:

In some cases, heavy-duty vehicles with beam axles can be customized to accommodate specific cargo and load requirements. This may involve adjusting the suspension components and optimizing the vehicle’s load-carrying capability based on the intended use.

Summary:

Beam axles are a fundamental component in enhancing the load-carrying capacity of vehicles, particularly in heavy-duty and commercial applications. Their ability to distribute weight evenly, handle heavy loads, resist damage, and simplify maintenance contributes to the overall efficiency and effectiveness of these vehicles in transporting goods, passengers, and cargo.

beam axle

Can you explain the role of a beam axle in a vehicle’s stability and handling?

A beam axle, also known as a solid axle or live axle, plays a significant role in a vehicle’s stability and handling, albeit with some trade-offs compared to independent suspension systems. Here’s an explanation of its role:

Stability:

  • 1. Load Distribution: Beam axles contribute to even load distribution between the two wheels on the same axle. This helps maintain stability, especially when the vehicle is carrying heavy loads or towing trailers. It prevents one wheel from becoming excessively loaded, which can lead to uneven tire wear and instability.
  • 2. Support for Heavy Loads: In applications that require carrying substantial weight, such as commercial trucks and heavy-duty vehicles, beam axles provide the necessary structural support. This ensures that the vehicle remains stable and can handle the load safely.
  • 3. Rugged Terrain: In off-road and 4×4 vehicles, the solid construction of beam axles helps maintain stability and control on rough and uneven terrain. The axle’s ability to flex and maintain contact with the ground is crucial for off-road performance.

Handling:

  • 1. Simplified Handling: Beam axles provide simplified handling characteristics. When both wheels on the same axle move together, it can result in predictable and straightforward handling, making them suitable for certain applications.
  • 2. Improved Traction (Off-Road): In off-road vehicles, the ability of both wheels on a beam axle to move in unison enhances traction. When one wheel loses grip, the other compensates by maintaining contact with the terrain, increasing off-road capabilities.
  • 3. Predictable Response: Vehicles with beam axles tend to provide a predictable response to steering inputs and road conditions, which can be an advantage in specific scenarios.

Limitations: While beam axles offer stability and simplified handling, they come with some limitations that can affect overall vehicle dynamics:

  • 1. Reduced Comfort: On uneven road surfaces, the simultaneous movement of both wheels on a beam axle can result in a less comfortable ride due to the transmission of bumps and imperfections directly to the vehicle’s cabin.
  • 2. Limited Handling Precision: Beam axles may result in less precise handling, especially in high-speed or cornering situations. The interconnected movement of wheels can lead to less agility and stability in such scenarios.
  • 3. Reduced Adaptability: The handling characteristics of vehicles with beam axles are less adaptable to a wide range of road conditions compared to vehicles with independent suspension, which can adjust each wheel independently to changing terrain.

In summary, the role of a beam axle in a vehicle’s stability and handling is to provide even load distribution, support heavy loads, and maintain control in specific situations. However, this comes at the cost of reduced ride comfort and handling precision, making beam axles more suitable for certain applications, such as heavy-duty trucks, off-road vehicles, and scenarios where simplicity and load-carrying capacity are prioritized over comfort and precision.

China Professional 1.8K CE Smith Galvanized Boat Trailer Axle Beam with EZ-Lube Standard Spindles   a car axleChina Professional 1.8K CE Smith Galvanized Boat Trailer Axle Beam with EZ-Lube Standard Spindles   a car axle
editor by CX 2024-02-24