China Trailer Parts 14ton 16ton Spoke Wheel 20″ 24″ Germany BPW Type Trailer Axle Truck Axle Rear Axle a 3-axle vehicle

Merchandise Description

Trailer Elements 14ton 16ton Spoke Wheel 20″ 24″  Germany BPW Sort Trailer Axle Truck Axle Rear Axle

1.Business introduction:

ZheJiang CZPT Co.,Ltd is 1 of the main makers specializing in the generation of trailer axles.

Our firm has high technological history, innovative manufacturing technological innovation, improvements detection implies, ideal high quality assurance method. It is a specialized maker integrating scientific analysis, layout, manufacturing and income.

The creation of “FUSAI” trailer axles handed the countrywide authoritative section detection. The fatigue existence is up to 1,five hundred,000 times without injury-a lot more than 3 occasions previously mentioned the countrywide common, which is in the top domestic level, and achieve or exceed the global standards. Our goods are common not only in domestic markets, but all above the globe. Because the goods are developed and optimized by pc, they have sensible composition, great braking overall performance, higher energy and rigidity, sturdy bearing potential, extended services lifestyle, great support, trustworthy by the users.  

two.”FUSAI” brand German sort trailer axle is made in accordance to the associated European standard. The rated loading capability of this trailer parts is offered from 12 ton to 18 ton.
1.German spindle layout which is the broadly employed in the business with confirmed efficiency
2.Minimal-alloy machined spindles, friction welded seamlessly, and all round heat managing process
3.Axle stubs and brake hubs are all CZPT forging, make sure they are far more potent and better steady
four.Particular clone-shape design on the axle-shoulders, lessening tension concentration and enhancing anti-exhaustion overall performance
five.Special design on axle stubs (with a precise declination angel at the two ends) to reduce tire put on
six.National and sector standard compliant established components
7.Nationwide Automobile Keep track of and Inspection Centre qualified axle shaft that undergoes above 1.2 million moments of Fatigue screening and developed to satisfy or exceed nationwide market expectations.

German variety axle requirements:

Axle

Type

Max.

Capability

(T)

Track

(mm)

Brake

(mm)

Center

Distance

Of

Spring

Seat

(mm)

Axle

Beam

(mm)

Center

Distance

Of

Brake

Chamber

(mm)

Stud

 

P.C.D

(mm)

Hole

Diameter

(mm)

Whole

Size

(mm)

Advised

Wheel

 

Axle

Fat

(kg)

FS-

12

twelve

1840

420*

two hundred

≥980

one hundred fifty*

a hundred and fifty

420

10*

M22*

one.5

335

281

2158

7.5V-20

390

FS-

fourteen

14

1840

420*

two hundred

≥900

a hundred and fifty*

one hundred fifty

430

ten*

M22*

1.5

335

281

2172

eight.0V-20

417

FS-

16

sixteen

1850

420*

two hundred

≥900

one hundred fifty*

a hundred and fifty

280

ten*

M22*

1.5

335

281

2245

8.5V-twenty

548

Interest:
one. Optional track size accessible.
two. Optional Abdominal muscles and automated slack adjuster obtainable.
three. All the factors are in widespread use of BPW.
four. Legal rights of modifying product’s design and specification are reserved. 

three.Scope of our enterprise:
1.axles (German type axle, American type axle, Spoke axle, Axle without having brake) 
2.Suspension (Bogie suspension, Spoke suspension, Mechanical suspension)
three.Landing gear (Outboard or inboard)
four.Fifth wheel (2”  3.5”) 
5.King pin (2”  3.5”)
6.Other axles and related areas (Minimal bed axle, hub, rims, spring, drum…) 

Any question, contact Claire

ZheJiang CZPT Co., Ltd

US $600-700
/ Piece
|
30 Pieces

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated|


Freight Cost Calculator

###

After-sales Service: Available
Warranty: 1 Year
Type: Axle

###

Customization:

###

Axle

Type

Max.

Capacity

(T)

Track

(mm)

Brake

(mm)

Center

Distance

Of

Spring

Seat

(mm)

Axle

Beam

(mm)

Center

Distance

Of

Brake

Chamber

(mm)

Stud

 

P.C.D

(mm)

Hole

Diameter

(mm)

Total

Length

(mm)

Recommended

Wheel

 

Axle

Weight

(kg)

FS-

12

12

1840

420*

200

≥980

150*

150

420

10*

M22*

1.5

335

281

2158

7.5V-20

390

FS-

14

14

1840

420*

200

≥900

150*

150

430

10*

M22*

1.5

335

281

2172

8.0V-20

417

FS-

16

16

1850

420*

200

≥900

150*

150

280

10*

M22*

1.5

335

281

2245

8.5V-20

548

US $600-700
/ Piece
|
30 Pieces

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated|


Freight Cost Calculator

###

After-sales Service: Available
Warranty: 1 Year
Type: Axle

###

Customization:

###

Axle

Type

Max.

Capacity

(T)

Track

(mm)

Brake

(mm)

Center

Distance

Of

Spring

Seat

(mm)

Axle

Beam

(mm)

Center

Distance

Of

Brake

Chamber

(mm)

Stud

 

P.C.D

(mm)

Hole

Diameter

(mm)

Total

Length

(mm)

Recommended

Wheel

 

Axle

Weight

(kg)

FS-

12

12

1840

420*

200

≥980

150*

150

420

10*

M22*

1.5

335

281

2158

7.5V-20

390

FS-

14

14

1840

420*

200

≥900

150*

150

430

10*

M22*

1.5

335

281

2172

8.0V-20

417

FS-

16

16

1850

420*

200

≥900

150*

150

280

10*

M22*

1.5

335

281

2245

8.5V-20

548

Types of Axles

An axle is the central shaft of a rotating wheel or gear. It can be fixed to the wheels or to the vehicle itself. Depending on the design, it may be fixed in different positions and have different types of mounting points. It may also have bearings. Axles come in different types and shapes. Some of them are more functional than others, and they may be semi-floating, tandem-drive, or lift axles.

Customized axles work best for cars

Adding big horsepower to a car can increase its performance, but this addition can also cause problems. It is important to take proper measurements for the rear axle to ensure it is not too long or too short. However, this measurement can become complicated with limited-slip differentials and offset pinions.
If you want to add custom axles to your car, it is important to know the physical properties of the axle and what kind of load it can handle. If you’re only planning to make a minor upgrade, it may be enough to get a standard axle. However, if you’re planning to make any major modifications, a customized axle will be a much better option.
Customized axles can be made of a variety of materials. They can be made of carbon steel or nickel steel. Some are made to float freely and others are made to be rigid. If you’re building a car, you should also consider the type of bearings and kingpins that it will use.
Axles come in a variety of types, based on the amount of force they produce. Some are pre-defined, while others are customized to meet your car’s specifications. The advantages of customizing your axles include improved wheel speed and torque. You can even adjust the angle of the axles for even more performance.
Axles can make or break your car’s performance. Customized axles are made with a proprietary alloy material that increases the torsional strength. Because of this, they are able to withstand a tremendous amount of power. Additionally, they are able to withstand lateral and bending loads.
While customizing your axle is an excellent idea, it is also very expensive. The best way to go about it is to work with a professional. They are able to make the axles you need and they’re usually well-made and made of quality materials. However, you should make sure you check the reviews and ratings of the manufacturer before making a purchase.
If you want to shorten the axle on your car, you should have it machined with new splines. The number of splines on an axle is important because it determines the strength of the axle. A 33-spline axle is more durable than a 28-spline axle, and a 40-spline axle is even stronger.
Axles

Semi-floating axles

Semi-floating rear axles are a common type of axle used in midsize trucks. They utilize a single wheel support bearing and use one axle shaft to transmit rotation to the wheels. A semi-floating axle is typically lubricated. Aftermarket kits are available to make the axle shaft stronger. However, these kits do not upgrade the axle differential assembly. Therefore, axles with weak differential assemblies may not benefit from conversion.
Semi-floating axles feature a “C-Clip” for holding the axle shaft in place in the axle casing. The problem with this design is that the axle shaft is exposed to more wear and tear. In addition, axle shafts with a C-Clip must be surface-hardened in the area where the axle shaft is flexed.
Semi-floating axles differ from full-floating axles in their appearance. A semi-floating axle has a hub that looks like the hub of a 3/4-ton 14-bolt Ford axle, whereas a full-floating axle’s hub looks like that of a 1 ton Ford axle.
Semi-floating axles have a tapered end. This makes them more efficient in carrying weight. In addition, they have a keyed end to prevent the rear hub from slipping around. This ensures the axle remains stable even when the rear wheels are turning. It is also important to note that semi-floating axles can only carry a small amount of weight, while full-floating axles can carry a lot of weight.
Semi-floating axles are lighter than full-float axles, which makes them less expensive to manufacture. Additionally, if one axle fails, the vehicle will continue to operate normally. Aside from this, semi-floating axles also have c-clips, which are the bearings that bear the weight of the vehicle.
A semi-floating axle is also available with an optional 5-lug hub. The axle shaft transmits rotational torque from the differential to the wheel, and the hub rides on tapered roller bearings. A full-floating axle assembly is stronger than a semi-floating axle system. In addition, it is compatible with factory 5-lug hubs.
Semi-floating axles are easier to install than full-floating axles. However, if you want to convert your semi-floating axle to a full-floating axle, you can install an aftermarket kit.
Axles

Tandem-drive axles

A tandem drive axle is a type of axle with two wheels on one side of the vehicle. Compared to a single axle with two wheels, a tandem drive axle is 60 pounds lighter and offers improved performance and durability. This type of axle is designed to optimize fleet uptime by balancing design efficiency and application-specific demands.
The suspension system of a tandem drive axle includes air springs that control the suspension of the lead and trailing axles. The air springs are pneumatically connected to a common reservoir. The springs’ displacements are averaged to provide a controlling input to the air spring pressurization controller.
A tandem drive axle may be used to transport heavier loads. It is important to note that the maximum weight of a tandem drive axle may be different in different states. In general, the federal regulations allow up to 34K pounds per axle, but the state regulations may be different. However, the weight limits of tandem axle groups are significantly lower than for single axles.
A tandem drive axle is a common type of vehicle drive axle. It is characterized by two axles spaced more than 40 inches apart. The distances are measured from the axle centers. A tandem-drive axle may be a drive axle or a steer axle. If the steer axle is overloaded, steering will be more difficult.
A tandem drive axle is a popular choice for commercial trucks. It is durable and can handle heavy loads. It is often used in cement mixing trucks and tanker trucks, where the weight of the load is distributed evenly between the two axles. The combination of the two axles helps a tandem drive truck make a smoother start from a stopped position. Because the weight is distributed across two axles, the torque generated by the engine can be distributed more effectively.
A tandem drive axle is usually paired with two air-lift axles. A tandem drive axle is also used when the weight of a cargo truck cannot be supported by the two air-lift axles. Tandem-drive axles are typically installed at the rear of a truck’s chassis.
Axles

Lift axles

Lift axles are a great way to reduce the workload on your powertrain, while also improving your fuel economy. These axles reduce rolling resistance, thrust, and tandem scrub, and can improve fuel economy by two to five percent. However, you should use lift axles with care, and pay special attention to suspension spacing.
Some lift axles have a steering feature, which allows the driver to control when the axle is raised, which is useful for taking sharp corners. However, some drawbacks to non-steerable lift axles include excessive tire wear. Steerable lift axles can alleviate this problem, but they are generally more expensive.
Another benefit of lift axles is that they increase a vehicle’s weight carrying capacity. This is useful for trucks with large load capacities. Although state laws vary, federal regulations are generally in favor of spreading the weight of a truck’s cargo across several axles. This helps protect large road pavements and bridges.
Lift axles are an important feature of dump trucks and should be considered if you’re considering making a change. However, they can be costly, and it’s important to consider the costs and benefits before deciding on a new configuration. These axles are best used when the load capacity of a truck is more than double what it is capable of carrying.
The developed algorithm has been tested under various scenarios. First, the algorithm accepts the command from the driver to lift axles. However, it ignores the tag axle dropping command if the vehicle is traveling more than 30 kph. Second, the vehicle stops for about 60 seconds. Once loaded, the algorithm drops the axles in order.
Besides enhancing the weight carrying capacity of a truck, lift axles are also used for auxiliary purposes. Most of these axles are used on dump trucks. In addition to the pusher axle, some dump trucks have a tag axle, which increases the distance between the steer axle and rearmost axle. This allows the truck to carry more cargo than the pusher axle.
China Trailer Parts 14ton 16ton Spoke Wheel 20China Trailer Parts 14ton 16ton Spoke Wheel 20
editor by czh 2022-12-30