China wholesaler 2,000 lbs Utility Trailer Axle Beam with Standard Spindles 60″ Hub Face 48″ Spring Center axle definition

Product Description

Round trailer axle beam measures 60″ from hub face to hub face (when hubs – sold separately – are mounted) and 48″ from spring center to spring center.

 

Features:

  • Round axle beam acts as part of your trailer’s suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer’s tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design – spring seats welded to underside of axle for mounting leaf springs (sold separately)
    • Low ride height makes it easier to load and unload your trailer
  • Straight spindles – no drop
    • Standard grease application
  • Spring seats and spindles are welded on

 

Specs:

  • Weight capacity: 2,000 lbs
  • Hub-face-to-hub-face length: 60″
  • Spring-center-to-spring-center length: 48″
  • Tubing outer diameter: 1-3/4″
  • Spindle size: 1-1/16″
  • Bearings (sold separately):
    • Inner bearing: L44649
    • Outer bearing: L44649
  • Seal RG06-571 (sold separately):
    • Inner diameter: 1.5″
    • Outer diameter: 1.987″

 

PN Axle Type Rating Hub Face to Hub Face Spring Center To Spring Center Axle diameter Spindle Size Finish Bearings
TAB019  2,000 lbs Trailer Axle Beam 2,000 lbs. 60″ 48″ 1-3/4″ 1-1/16″  Black Paint L44649/10;L44649/10

SELECTING THE PROPER TRAILER AXLE
When selecting an axle for your application remember to consider the following important specifications:

  • LOAD CAPACITY:  the load rating of the axle must support the maximum gross vehicle weight rating. For multiple axle trailers divide the GVWR by the number of axles to determine the minimum load capacity of each axle.

  • TRACK LENGTH:  measure your axle track length by determining the distance between the center of 1 tire to the center of the other tire. A more precise measurement can be made by measuring the distance from 1 ‘HUB FACE’ to the other. The hub face is also known as the mounting surface where the wheel studs are located.

  • SPRING CENTERS:  measure the distance from the center of 1 spring to the center of the other.
    NOTE: not required for replacement torsion axles

  • OVERALL LENGTH:  measure the distance from the very end of an axle’s spindle to the very end of the opposite spindle.

  • AXLE STYLE:  important when reusing old mounting hardware and also for proper tire clearance. Includes straight axles (round or square), drop axles with offset spindles, and torsion axles. Also consider spindle size when reusing existing hubs or drums.

  • AXLE CAMBER:  Most trailer axles are designed with a bend in the tube that will deflect when the load (weight of the trailer) is applied. This will theoretically bring the trailer wheel camber toward a 0 value that is the best setting for most trailer applications. This will allow the tires to wear evenly and allow the longest tread life. Camber can be affected by damage to the axle. For example, if the axle spindle is bent, this will usually cause a negative camber on that side which will cause excess tread wear on the inside of that tire.

     

 

HangZhou CZPT Machinery Co., Ltd is a professional manufacturer of trailer parts in HangZhou, ZHangZhoug Province, China since 2016.

 

We can produce many trailer parts & accessories as follows: Towbars, axles, brake drums, hubs, brake disc, bearings, springs and springs and suspension kits, couplings, mudguards, U-Bolts, Jockey Wheels, keel rollers and brackets, wobble roller, wheel spacer, equalizers and all accessories related to trailers.

If you can send me the drawings or specifications of the trailer parts, mechanical parts and wheels, we can give you our price.

Q1: Do you have factory?
A: Yes, we have our own factory, own engineers, we can meet custom’s unique requirement.

Q2: Can I have a sample order?
A: Yes, welcome sample order to test and check quality. Mixed samples are acceptable.

Q3: It’s OK to print my logo on your product?
A: Yes, we can according to your exact requirement.

Q4:How do you ship the goods and how long does it take arrive?
A: We usually shipped by DHL, UPS, FedEx, it usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5: What is your advantages?
A: We are professional supplier for more than 10 years, we always put the quality and price at the first place. At the same time, our products are exported to various countries, we have full experience to solve thorny problems.

If you want to know about our products and us, welcome to enquiry and email me.thanks

1-Welcome OEM

  1. You can use your own brands or ours, if you use our brand, our professional team will help you design the packing.

2-Our service

  1. You inquiry related to our products or prices will be replied in 24 hours.
  2. Well-trained and experienced staffs to answer all your enquirys in fluent English.
  3. Protection of your sales area, ideas of your design and all your private information.
  4. We have a QC team, every product will be checked by them before packed.

3-Welcome to visit

  1. When you come to our company visit us, we will arrange a car for picking up and help you book hotel. If you want to visit the local scenic spot, our colleague will accompany you.

4-Warranty

  1. Customer should be provide the video and the pictures for the problem products.
  2. Products returned within the warranty period must bear product number & date code.

5-After service

  1. In production and after delivery, we will track on time and tell you goods situation.
  2. When the goods arrived, if you find any design and quality questions, or difference from your samples, please feel free to contact us, we will find the question and solve it with you.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Condition: New
Axle Number: 2
Application: Trailer
Certification: ASTM, CE, DIN, ISO
Material: Steel
Type: Front Axles
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

beam axle

What innovations or advancements have been made in beam axle technology?

Beam axle technology, while known for its simplicity and durability, has seen innovations and advancements over the years to improve performance and versatility. Some notable developments in beam axle technology include:

1. Air Suspension:

One significant advancement is the integration of air suspension systems with beam axles. Air suspension allows for adjustable ride height and load-leveling capabilities, enhancing ride comfort and load-carrying capacity. This innovation is particularly valuable for commercial vehicles.

2. Steering Mechanisms:

Modern beam axles in some vehicles incorporate advanced steering mechanisms to improve maneuverability. Examples include rack-and-pinion steering or electronic power steering, which enhances control and handling, especially in heavy-duty and off-road applications.

3. High-Strength Materials:

Advancements in materials have led to the use of high-strength alloys and composite materials in beam axle construction. These materials offer improved strength-to-weight ratios, reducing overall weight while maintaining durability. Lighter axles contribute to better fuel efficiency in vehicles.

4. Redesigned Suspension Geometry:

Manufacturers have optimized the suspension geometry in some beam axle configurations to reduce vibration, enhance stability, and provide better handling. These improvements result in a more comfortable and controlled ride for both passengers and drivers.

5. Improved Lubrication Systems:

Better lubrication systems have been developed to ensure smoother operation and extended axle component lifespan. These systems help prevent wear and reduce maintenance requirements.

6. Enhanced Load-Carrying Capacity:

Advancements in axle design and materials have allowed for increased load-carrying capacity without compromising axle integrity. This is crucial for commercial vehicles that transport heavy loads.

7. Adaptive Damping Systems:

Some vehicles equipped with beam axles feature adaptive damping systems that adjust shock absorber settings in real-time based on road conditions and driving dynamics. This results in a smoother and more controlled ride, especially when the vehicle is fully loaded.

8. Noise and Vibration Reduction:

Manufacturers have focused on reducing noise and vibration in vehicles with beam axles. Improved bushings, dampers, and mounting systems help minimize unwanted noise and vibration, contributing to a quieter and more comfortable driving experience.

9. Maintenance and Diagnostic Technology:

Advancements in diagnostics and monitoring technology allow for proactive maintenance of beam axles. Sensor systems can detect issues early, improving safety and reducing unplanned downtime for maintenance and repairs.

Summary:

Beam axle technology has evolved to meet the changing demands of modern vehicles. These innovations enhance ride comfort, safety, load-carrying capacity, and overall performance, making beam axles a competitive choice for a wide range of applications, including commercial vehicles and off-road machines.

beam axle

How does a live axle differ from a dead axle in the context of beam axles?

In the context of beam axles, live axles and dead axles represent two distinct configurations that serve different purposes and have specific characteristics:

Live Axle (Driven Axle):

A live axle is an axle that is actively connected to the engine and is responsible for driving the wheels. In a live axle configuration:

  • The axle shafts are connected to the wheels and are capable of delivering power to propel the vehicle.
  • The wheels on a live axle are actively powered and provide propulsion, typically in rear-wheel-drive or four-wheel-drive (4WD) vehicles.
  • Live axles are common in trucks, off-road vehicles, and 4×4 vehicles, where the ability to provide power to multiple wheels is crucial for traction in challenging terrain.
  • Live axles are sometimes referred to as “driven axles” because they actively drive the vehicle.

Dead Axle (Trailing or Support Axle):

A dead axle, in contrast, is an axle that is not powered and does not contribute to the vehicle’s propulsion. In a dead axle configuration:

  • The axle shafts are not connected to the engine and do not receive power; they simply support the wheels.
  • Dead axles are often used in the front of front-wheel-drive vehicles, where the engine provides power to the front wheels, and the rear wheels are supported by dead axles.
  • These axles are also used in trailers and semi-trailers, where they support the weight of the trailer but do not provide power to the wheels.
  • Dead axles are sometimes referred to as “trailing axles” or “support axles” because they do not actively drive the vehicle.

Differences:

The primary difference between live axles and dead axles in the context of beam axles is whether they are responsible for providing power to the wheels. Live axles actively drive the vehicle, while dead axles are passive and serve a support or trailing role. The choice between these configurations depends on the specific vehicle design and its intended use, with live axles favored for off-road and high-traction applications and dead axles used for support and weight distribution.

beam axle

How do beam axles compare to other types of axles in terms of durability?

Beam axles, also known as solid axles or live axles, have their own set of advantages and disadvantages when it comes to durability compared to other types of axles. Let’s compare the durability of beam axles to some common axle types:

1. Beam Axles vs. Independent Suspension Axles:

Beam Axles:

  • Advantages:
  • – Beam axles are known for their durability and robust construction.
  • – They are less complex and have fewer moving parts compared to independent suspension systems, reducing the potential points of failure.

Independent Suspension Axles:

  • Advantages:
  • – Independent suspension axles can offer a smoother ride and better handling on paved roads.
  • – They adapt to uneven terrain more effectively due to the independent movement of each wheel, which can reduce stress on the axle components.

2. Beam Axles vs. Torsion Axles:

Beam Axles:

  • Advantages:
  • – Beam axles are sturdy and suitable for heavy loads, making them common in applications like trucks and trailers.
  • – They provide reliable load distribution, reducing the risk of overloading a single wheel.

Torsion Axles:

  • Advantages:
  • – Torsion axles are known for their maintenance-free operation and resistance to corrosion, as they have fewer exposed components.
  • – They provide a smooth and independent suspension system, enhancing ride comfort for trailers and smaller recreational vehicles.

3. Beam Axles vs. Half-Shafts (Constant Velocity Axles – CV Axles):

Beam Axles:

  • Advantages:
  • – Beam axles are highly durable and can withstand significant loads and rough terrain, making them suitable for applications like off-road vehicles and trucks.
  • – Their solid construction reduces the risk of component failure.

Half-Shafts (CV Axles):

  • Advantages:
  • – Half-shafts, often used in front-wheel-drive vehicles, provide better maneuverability and handling on paved roads due to their ability to pivot and accommodate steering.
  • – They offer a balance between durability and adaptability to various road conditions.

While beam axles excel in terms of durability and load-bearing capacity, they may sacrifice some ride comfort and handling precision, particularly on uneven roads. The choice between beam axles and other axle types depends on the specific vehicle application and the trade-offs between durability, handling, and comfort.

China wholesaler 2,000 lbs Utility Trailer Axle Beam with Standard Spindles 60China wholesaler 2,000 lbs Utility Trailer Axle Beam with Standard Spindles 60
editor by CX 2024-02-25